Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: This product is pre-owned and may not include the same accessories as a new, unused unit. - other accessories not shown or listed here.This autoclave is a 2013 model with 1,650 run in it. It was inspected inside and out for obvious defects, then it was put through an initial functionality test to verify it is in working order. To insure this sterilizers continued Future operation, preventative maintenance parts were installed, which include, a new Door Bellows, Door Switch, Power Switch, Door Seal. The Reservoir Tank was cleaned and flushed, and a new Reservoir Cap, Condenser Coil, Safety Valve, and Air Jet Valve were installed. The Chamber and Water Fill Filter were cleaned and a new HEPA Air Drying Filter and Cap were installed. Cleaned the Sterilizing Tray and Rack. Then testing proceeded on this sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
This autoclave is a 2013 model with 1,650 run in it. It was inspected inside and out for obvious defects, then it was put through an initial functionality test to verify it is in working order. To insure this sterilizers continued Future operation, preventative maintenance parts were installed, which include, a new Door Bellows, Door Switch, Power Switch, Door Seal. The Reservoir Tank was cleaned and flushed, and a new Reservoir Cap, Condenser Coil, Safety Valve, and Air Jet Valve were installed. The Chamber and Water Fill Filter were cleaned and a new HEPA Air Drying Filter and Cap were installed. Cleaned the Sterilizing Tray and Rack. Then testing proceeded on this sterilizer. Connected it to a 120 volt power source, added distilled water and ran the autoclave through all it's preset sterilizing and drying cycles. To verify that this autoclave is achieving it's required maximum sterilizing temperature, it was temperature tested using a Max Register Thermometer, and found to reach 273 F for an entire cycle.
- Manufacturer: Tuttnauer
- Model: EZ10
- Serial Number: 13061872
- Power Requirements: 120V
- Year: 2013
- Sterilizer Type: steam chamber
- Timer Function: features a timer with a variety of cycle options
- Controls: digital control display
- Chamber Depth: 40 cm
- Chamber Diameter: 25 cm
- Number of Trays: 4 trays
- Cycle Count: 1,650
1 - Tuttnauer EZ10 Autoclave Steam Sterilizer 4 - Sterilizing Trays w/ Rack 1 - Drain Hose 1 - Power Cord
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
-
Identify the Equipment You Need
Browse our online catalog for New, Certified Pre-Owned and used dental equipment from trusted manufacturers. Each listing includes detailed specifications, condition reports, and photos to help you choose the right equipment for your practice.
-
Reserve Your Equipment
Once you’ve identified the right equipment for your practice, click to reserve the equipment. We’ll place the item on hold for 48 hours, giving you time to finalize your decision without the risk of someone else purchasing it.
-
Work With Your Henry Schein Representative
After you reserve the equipment, we’ll automatically notify your Henry Schein representative. They’ll follow up with an official quote and invoice, and will help guide you through payment, install, and delivery options.
