Shop with confidence! This product has been fully inspected to avoid any buyer surprises. Read our in-depth product listing below.
Your purchase will NOT include: This product is pre-owned and may not include the same accessories as a new, unused unit. - other accessories not shown or listed here.This autoclave is a 2007model with10 cycles on what could be assumed to be newer Display Control Board, evidence and the model year suggest the unit has had many more cycles run on it. Prior to testing this autoclave, the major components were inspected and tested and any issues that were found were repaired. As part of the preventive maintenance practices for this type of Tuttnauer, the Reservoir Tank was cleaned and flushed and a new Safety Valve, Air Jet Valve and Reservoir Cap were installed. Installed a new Water Pump, Door Switch, Power Switch, Door Bellows Assembly and Door Seal. Installed a new HEPA Air drying Filter and Cap. Cleaned the Sterilizing Trays and Rack. To test this autoclave, it was first connected to a 120 volt power source, distilled water was added, it was then properly levelled as per it's chamber size requirement and then testing began. This sterilizer was run through all it's preset sterilizing and drying cycles several times. To verify that this autoclave is achieving it's maximum required sterilizing temperature during a cycle, it was temperature tested with the use of a Max Register Thermometer, and found to exceed 270 F during a sterilization cycle.
This autoclave is a 2007model with10 cycles on what could be assumed to be newer Display Control Board, evidence and the model year suggest the unit has had many more cycles run on it. Prior to testing this autoclave, the major components were inspected and tested and any issues that were found were repaired. As part of the preventive maintenance practices for this type of Tuttnauer, the Reservoir Tank was cleaned and flushed and a new Safety Valve, Air Jet Valve and Reservoir Cap were installed. Installed a new Water Pump, Door Switch, Power Switch, Door Bellows Assembly and Door Seal. Installed a new HEPA Air drying Filter and Cap. Cleaned the Sterilizing Trays and Rack. To test this autoclave, it was first connected to a 120 volt power source, distilled water was added, it was then properly levelled as per it's chamber size requirement and then testing began. This sterilizer was run through all it's preset sterilizing and drying cycles several times. To verify that this autoclave is achieving it's maximum required sterilizing temperature during a cycle, it was temperature tested with the use of a Max Register Thermometer, and found to exceed 270 F during a sterilization cycle.
- Manufacturer: Tuttnauer
- Model: EZ9
- Serial Number: 2611787
- Power Requirements: 120
- Year: 2007
- Sterilizer Type: steam chamber
- Timer Function: features a timer with a variety of cycle options
- Controls: digital control display
- Chamber Depth: 40 cm
- Chamber Diameter: 23 cm
- Number of Trays: 3 trays
- Cycle Count: 8,200
1 - Tuttnauer EZ9 Autoclave Steam Sterilizer 3 - Sterilizing Trays w/ Rack 1 - Drain Hose 1 - Power Cord
Item Excludes:
This product is pre-owned and may not include the same accessories as a new, unused unit.
-
Identify the Equipment You Need
Browse our online catalog for New, Certified Pre-Owned and used dental equipment from trusted manufacturers. Each listing includes detailed specifications, condition reports, and photos to help you choose the right equipment for your practice.
-
Reserve Your Equipment
Once you’ve identified the right equipment for your practice, click to reserve the equipment. We’ll place the item on hold for 48 hours, giving you time to finalize your decision without the risk of someone else purchasing it.
-
Work With Your Henry Schein Representative
After you reserve the equipment, we’ll automatically notify your Henry Schein representative. They’ll follow up with an official quote and invoice, and will help guide you through payment, install, and delivery options.
